Separate Reports Shed Light on Why CDC SARS-CoV-2 Test Kits Failed During Start of COVID-19 Pandemic
HHS Office of Inspector General was the latest to examine the quality control problems that led to distribution of inaccurate test to clinical laboratories nationwide
Failure on the part of the Centers for Disease Control and Prevention (CDC) to produce accurate, dependable SARS-CoV-2 clinical laboratory test kits at the start of the COVID-19 pandemic continues to draw scrutiny and criticism of the actions taken by the federal agency.
In the early weeks of the COVID-19 pandemic, the CDC distributed faulty SARS-CoV-2 test kits to public health laboratories (PHLs), delaying the response to the outbreak at a critical juncture. That failure was widely publicized at the time. But within the past year, two reports have provided a more detailed look at the shortcomings that led to the snafu.
The most recent assessment came in an October 2023 report from the US Department of Health and Human Services Office of Inspector General (OIG), following an audit of the public health agency. The report was titled, “CDC’s Internal Control Weaknesses Led to Its Initial COVID-19 Test Kit Failure, but CDC Ultimately Created a Working Test Kit.”
“We identified weaknesses in CDC’s COVID-19 test kit development processes and the agencywide laboratory quality processes that may have contributed to the failure of the initial COVID-19 test kits,” the OIG stated in its report.
Prior to the outbreak, the agency had internal documents that were supposed to provide guidance for how to respond to public health emergencies. However, “these documents do not address the development of a test kit,” the OIG stated.
“If the CDC can’t change, [its] importance in health in the nation will decline,” said microbiologist Jill Taylor, PhD (above), Senior Adviser for the Association of Public Health Laboratories in Washington, DC. “The coordination of public health emergency responses in the nation will be worse off.” Clinical laboratories that were blocked from developing their own SARS-CoV-2 test during the pandemic would certainly agree. (Photo copyright: Columbia University.)
Problems at the CDC’s RVD Lab
Much of the OIG’s report focused on the CDC’s Respiratory Virus Diagnostic (RVD) lab which was part of the CDC’s National Center for Immunization and Respiratory Diseases (NCIRD). The RVD lab had primary responsibility for developing, producing, and distributing the test kits. Because it was focused on research, it “was not set up to develop and manufacture test kits and therefore had no policies and procedures for developing and manufacturing test kits,” the report stated.
The RVD lab also lacked the staff and funding to handle test kit development in a public health emergency, the report stated. As a result, “the lead scientist not only managed but also participated in all test kit development processes,” the report stated. “In addition, when the initial test kit failed at some PHLs, the lead scientist was also responsible for troubleshooting and correcting the problem.”
To verify the test kit, the RVD lab needed samples of viral material from the agency’s Biotechnology Core Facility Branch (BCFB) CORE Lab, which also manufactured reagents for the kit.
“RVD Lab, which was under pressure to quickly create a test kit for the emerging health threat, insisted that CORE Lab deviate from its usual practices of segregating these two activities and fulfill orders for both reagents and viral material,” the report stated.
This increased the risk of contamination, the report said. An analysis by CDC scientists “did not determine whether a process error or contamination was at fault for the test kit failure; however, based on our interviews with CDC personnel, contamination could not be ruled out,” the report stated.
The report also cited the CDC’s lack of standardized systems for quality control and management of laboratory documents. Labs involved in test kit development used two different incompatible systems for tracking and managing documents, “resulting in staff being unable to distinguish between draft, obsolete, and current versions of laboratory procedures and forms.”
Outside Experts Weigh In
The OIG report followed an earlier review by the CDC’s Laboratory Workgroup (LW), which consists of 12 outside experts, including academics, clinical laboratory directors, state public health laboratory directors, and a science advisor from the Association of Public Health Laboratories. Members were appointed by the CDC Advisory Committee to the Director.
This group cited four major issues:
- Lack of adequate planning: For the “rapid development, validation, manufacture, and distribution of a test for a novel pathogen.”
- Ineffective governance: Three labs—the RVD Lab, CORE Lab, and Reagent and Diagnostic Services Branch—were involved in test kit development and manufacturing. “At no point, however, were these three laboratories brought together under unified leadership to develop the SARS-CoV-2 test,” the report stated.
- Poor quality control and oversight: “Essentially, at the start of the pandemic, infectious disease clinical laboratories at CDC were not held to the same quality and regulatory standards that equivalent high-complexity public health, clinical and commercial reference laboratories in the United States are held,” the report stated.
- Poor test design processes: The report noted that the test kit had three probes designed to bind to different parts of the SARS-CoV-2 nucleocapsid gene. The first two—N1 (topology) and N2 (intracellular localization)—were designed to match SARS-CoV-2 specifically, whereas the third—N3 (functions of the protein)—was designed to match all Sarbecoviruses, the family that includes SARS-CoV-2 as well as the coronavirus responsible for the 2002-2004 SARS outbreak.
The N1 probe was found to be contaminated, the group’s report stated, while the N3 probe was poorly designed. The report questioned the decision to include the N3 probe, which was not included in European tests.
Also lacking were “clearly defined pass/fail threshold criteria for test validation,” the report stated.
Advice to the CDC
Both reports made recommendations for changes at the CDC, but the LW’s were more far-reaching. For example, it advised the agency to establish a senior leader position “with major responsibility and authority for laboratories at the agency.” This individual would oversee a new Center that would “focus on clinical laboratory quality, laboratory safety, workforce training, readiness and response, and manufacturing.”
In addition, the CDC should consolidate its clinical diagnostic laboratories, the report advised, and “laboratories that follow a clinical quality management system should have separate technical staff and space from those that do not follow such a system, such as certain research laboratories.”
The report also called for collaboration with “high functioning public health laboratories, hospital and academic laboratories, and commercial reference laboratories.” For example, collaborating on test design and development “should eliminate the risk of a single point of failure for test design and validation,” the LW suggested.
CBS News reported in August that the CDC had already begun implementing some of the group’s suggestions, including agencywide quality standards and better coordination with state labs.
However, “recommendations for the agency to physically separate its clinical laboratories from its research laboratories, or to train researchers to uphold new quality standards, will be heavy lifts because they require continuous funding,” CBS News reported, citing an interview with Jim Pirkle, MD, PhD, Director, Division of Laboratory Sciences, National Center for Environmental Health, at the CDC.
—Stephen Beale
Related Information:
The CDC Works to Overhaul Lab Operations after COVID Test Flop