News, Analysis, Trends, Management Innovations for
Clinical Laboratories and Pathology Groups

Hosted by Robert Michel

News, Analysis, Trends, Management Innovations for
Clinical Laboratories and Pathology Groups

Hosted by Robert Michel
Sign In

University of Washington Researchers Develop Home Blood Clotting Clinical Laboratory Test That Uses a Smartphone and a Single Drop of Blood

UW scientists believe their at-home test could help more people on anticoagulants monitor their clotting levels and avoid blood clots

In a proof-of-concept study,researchers at the University of Washington (UW) are developing a new smartphone-based technology/application designed to enable people on anticoagulants such as warfarin to monitor their clotting levels from the comfort of their homes. Should this new test methodology prove successful, clinical laboratories may have yet one more source of competition from this at-home PT/INR test solution.

PT/INR (prothrombin time with an international normalized ratio) is one of the most frequently performed clinical laboratory blood tests. This well-proven assay helps physicians monitor clotting in patients taking certain anticoagulation medications.

However, the process can be onerous for those on anticoagulation drugs. Users of this type of medication must have their blood tested regularly—typically by a clinical laboratory—to ensure the medication is working effectively. When not, a doctor visit is required to adjust the amount of the medication in the bloodstream.

Alternatively, where a state’s scope of practice law permits, pharmacists can perform a point-of-care test for the patient, thus allowing the pharmacist to appropriately adjust the patient’s prescription.

Though in the early stages of its development, were the UW’s new smartphone-based blood clotting test to be cleared by the federal Food and Drug Administration (FDA), then users would only need to see a doctor when their readings went and stayed out of range, according to Clinical Lab Products (CLP).

The UW researchers published their findings in the journal Nature Communications, titled, “Micro-Mechanical Blood Clot Testing Using Smartphones.”

Enabling Patients to Test Their Blood More Frequently

More than eight million Americans with mechanical heart valves or other cardiac conditions take anticoagulants, and 55% of people taking those medication say they fear experiencing life-threatening bleeding, according to the National Blood Clot Alliance.

They have reason to be worried. Even when taking an anticoagulation drug, its level may not stay within therapeutic range due to the effects of food and other medications, experts say. 

“In the US, most people are only in what we call the ‘desirable range’ of PT/INR levels about 64% of the time. This number is even lower—only about 40% of the time—in countries such as India or Uganda, where there is less frequent testing. We need to make it easier for people to test more frequently,” said anesthesiologist and co-author of the study Kelly Michaelsen, MD, PhD, UW Assistant Professor of Anesthesiology and Pain Medicine, in a UW news release.

Shyam Gollakota, PhD
“Back in the day, doctors used to manually rock tubes of blood back and forth to monitor how long it took a clot to form. This, however, requires a lot of blood, making it infeasible to use in home settings,” said senior study author Shyam Gollakota, PhD (above), professor and head of the Networks and Mobile Systems Lab at UW’s Paul G. Allen School of Computer Science and Engineering, in the UW news release. “The creative leap we make here is that we’re showing that by using the vibration motor on a smartphone, our algorithms can do the same thing, except with a single drop of blood. And we get accuracy similar to the best commercially available techniques [used by clinical laboratories].” (Photo copyright: University of Washington.)

How UW’s Smartphone-based Blood Clotting Test Works

The UW researchers were motived by the success of home continuous glucose monitors, which enable diabetics to continually track their blood glucose levels.

According to the Nature Communications paper, here’s how UW’s “smartphone-based micro-mechanical clot detection system” works:

  • Samples of blood plasma and whole blood are placed into a thimble-size plastic cup.
  • The cup includes a small copper particle and thromboplastin activator.
  • When the smartphone is turned on and vibrating, the cup (which is mounted on an attachment) moves beneath the phone’s camera.
  • Video analytic algorithms running on the smartphone track the motion of the copper particle.
  • If blood clots, the “viscous mixture” slows and stops.
  • PT/INR values can be determined in less than a minute.  

“Our system visually tracks the micro-mechanical movements of a small copper particle in a cup with either a single drop of whole blood or plasma and the addition of activators,” the researchers wrote in Nature Communications. “As the blood clots, it forms a network that tightens. And in that process, the particle goes from happily bouncing around to no longer moving,” Michaelsen explained.

The system produced these results:

  • 140 de-identified plasma samples: PT/INR with inter-class correlation coefficients of 0.963 and 0.966.
  • 79 de-identified whole blood samples: 0.974 for both PT/INR.

Another At-home Test That Could Impact Clinical Laboratories

The UW scientists intend to test the system with patients in their homes, and in areas and countries with limited testing resources, Medical Device Network reported.

Should UW’s smartphone-based blood-clotting test be cleared by the FDA, there could be a ready market for it. But it will need to be offered it at a price competitive with current clinical laboratory assays for blood clotting, as well as with the current point-of-care tests in use today.

Nevertheless, UW’s work is the latest example of a self-testing methodology that could become a new competitor for clinical laboratories. This may motivate medical laboratories to keep PT/INR testing costs low, while also reporting quick and accurate results to physicians and patients on anticoagulants.

Alternatively, innovative clinical laboratories could develop a patient management service to oversee a patient’s self-testing at home and coordinate delivery of the results with the patient’s physician and pharmacist. This approach would enable the lab to add value for which it could be reimbursed. 

Donna Marie Pocius

Related Information:

Smartphone App Can Vibrate a Single Drop of Blood to Determine How Well It Clots

Blood Coagulation Testing Using Smartphones

Micro-Mechanical Blood Clot Testing Using Smartphones

55% of Americans Taking Blood Thinners Indicate They Fear Suffering from Major Blooding, 73% More Cautious with Routine Activities to Avoid Risk

University of Washington Develops New Blood Clotting Test

Home-testing IVD Diagnostic Devices Win Rigorous MDEA Design Awards as Part of Ongoing Trend to Move Medical Laboratory Tests Closer to Patient

Innovative designs promote in vitro home-testing medical diagnostic devices that could impact the work done in clinical laboratories

With greater frequency, new diagnostic technologies make it possible to move medical laboratory tests out of the traditional central lab facility and closer to the patient—including patient home self-testing. Even as this happens, engineers and designers are delivering elegant, well-designed devices designed for use in clinical laboratories as well as in near-patient settings.

Evidence of this trend comes from the most recent winners in the annual contest known as the Medical Device Excellence Awards (MDEA). In this year’s contest, two of the products receiving awards were medical laboratory test devices that were deemed to be innovative solutions to improve the lab testing process.

This contest intends to “recognize significant advances in medical product design and engineering that improve the quality of healthcare delivery and accessibility.” The competition was first held in 1998 and is sometimes described as the “Oscars” of the medical device. Receiving an MDEA medal offers validation, publicity, and a host of other benefits. (more…)

;